On my KX3 tapping the keyer/mic knob toggles the display between power and alc and it stays there. If in the power/SWR display mode changing the mic gain temporarily shows alc but then reverts back to power.
Tap the button and it will stay put. Michael Blake - k9jri > On Aug 12, 2016, at 22:02, James Bennett <[email protected]> wrote: > > OK - I’m officially stumped. How does one keep the meter display showing ALC > continuously instead of RF output? When I operate the digital modes, in > DATA-A, I want to have the ALC displayed so that I can keep an eye on making > sure that 5th bar is just flickering. There is a difference in setting the > Mic gain between JT65 and JT9, so this is something I like to monitor. > However, after setting the MIC gain to the proper ALC level the display > insists on jumping back to RF output. Is there a way to stop this from > happening? > > Tnx & 73, Jim / W6JHB > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
