I am setting up a new K3S-10 equipped with only the 2.7 filter. It appears that the maximum bandwidth for data a mode is 2200 hz with a lower limit of 200hz and an upper limit of 2400hz. I can use the bandwidth controls to reduce the bandwidth but they will not lower the low cut below 200 nor raise the high cut above 2400. This is obviously happening in the dsp as the cutoffs are hard straight lines in the waterfall.
I can not find any info on this in the Cady book, the manual, or the list archives. My question is are these the hard data a bandwidth limits or have I missed something in the configuration. Thanks in advance for the help. AL7CR ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
