I did find search answers for integrating the full K line but I do
nothave a P3, only a K3 and KPA500.
If you do not have a P3, connect the RS-232 plug from the MK II to
the Elecraft (E980297) RJ45 to DE9 cable as indicated in the figure
at the bottom of page 19 in the K3 Owner's Manual:
"If not using a P3, connect the DE9 end of this cable to a
computer's RS-232 port (use an additional cable if required)."
You will still need to configure the K3 for RS-232 control instead
of USB.
73,
... Joe, W4TV
On 8/20/2016 4:36 PM, Jim Hoge wrote:
Joe,
Thanks for the quick response. I did find search answers for integrating the
full K line but I do not have a P3, only a K3 and KPA500. That's why I asked if
2 y cables were necessary. It got a little confusing when the Win4K3 info said
to hook up both the amp and the radio with separate cables.
Tnx agn,
Jim
W5QM
Sent from my iPhone
On Aug 20, 2016, at 15:17, "Joe Subich, W4TV" <[email protected]> wrote:
On 8/20/2016 3:58 PM, [email protected] wrote:
I'm sure this has been asked and answered many times but I could not
find search results specific to my plans.
Yes, this has been answered many times.
You will need the Elecraft 15 pin "Y" cable for the ACC jack (in order
to connect FSK). In addition, you should *not* use the KUSB. Instead,
connect and configure the K3S/P3 for *RS232* as documented in the K3S
Owners Manual (page 19) and connect the RS-232 plug from the MK II to
the P3 "PC" jack.
73,
... Joe, W4TV
On 8/20/2016 3:58 PM, [email protected] wrote:
I'm sure this has been asked and answered many times but I could not
find search results specific to my plans. Question is, do I need a
pair of Y cables to add my microKeyer II to my K3 and KPA500? The K3
and KPA500 are connected to each other with a KPAK3AUX cable. The
radio and amp are connected to the computer with KUSB cables. Plans
are to demo Win4K3 for rig control and panadapter display for an
SDRplay.
Tnx, Jim W5QM
______________________________________________________________
Elecraft mailing list Home:
http://mailman.qth.net/mailman/listinfo/elecraft Help:
http://mailman.qth.net/mmfaq.htm Post:
mailto:[email protected]
This list hosted by: http://www.qsl.net Please help support this
email list: http://www.qsl.net/donate.html Message delivered to
[email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
