Hi Don
What I mean by #1 and #8 is that from what I gather by reading the
Manual, the K3S supports 8 different external transverters and the
internal one. The externals can be assigned Band 1 through 9 while
the internal can be defined as Band 0 through 9. As I read it, the
ADR settings have to do with outputing a logic signal to select which
external xvtr is selected. Again as I read it, this has nothing to do
with CAT commands coming from an external computer (in my case,
either WSJT or MAP65.
Ken
At 08:51 AM 8/22/2016, Don Wilhelm [email protected] [Elecraft_K3] wrote:
Ken,
I am not sure what you mean by "#1" and "#8" - I can guess, but I don't
have enough information to know what you mean.
Look at the XVn menu items in the K3S manual listing of the menu
functions. There are two that will affect the selection of the proper
transverter - 1) XVn ON, and 2) XVn ADR. Be certain both are set
correctly for each transverter.
What I am saying is that even though you may call the external
transverter #8, it is the XVn ADR that does the selection of the
transverter - note that the band selection (address) information must be
set to match the addressing of that decoded by the transverter.
73,
Don W3FPR
On 8/22/2016 11:35 AM, Ken Arck wrote:
> I've been using an external xvtr with my K3s for a while now and over
> the weekend, I installed the internal K144XV one. The internal is set
> as #1 and the external is set as #8 (the external has always been
> defined as #8).
>
> Now I notice that CAT control (to change the freq) calls #1 and not #8
> as I want. Is it a matter of the "first one in line" - based on
> frequency - is the one called or can I change something in CONFIG to
> select which xvtr is set?
>
------------------------------------
------------------------------------
------------------------------------
Yahoo Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Elecraft_K3/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Elecraft_K3/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/
------------------------------------------------------------------------------
President and CTO - Arcom Communications
Makers of repeater controllers and accessories.
http://www.arcomcontrollers.com/
Authorized Dealers for Kenwood and Telewave and
we offer complete repeater packages!
AH6LE/R - IRLP Node 3000
http://www.irlp.net
"We don't just make 'em. We use 'em!"
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
