My eyes glaze over at the thought of Skimmer, but I heartily agree with Don
about LP-Bridge. I use it with my K3s and run my logging program (DXBase),
SpectraVue (runs SDR-IQ as bandscope), MMTTY, FLDIGI, N1MM, etc. LP-Bridge will
also start all of these programs automatically when executed.
On 9/2/2016 4:09 PM, Don Wilhelm wrote:
Pete,
...
If you need to run other PC applications (loggers and other rig control
applications) that each want to use the COM port connection to your K3 (in
addition to CW Skimmer) - only one application can talk with the K3 at the
same time. Enter LP-Bridge or Com-O-Com which create virtual ports on your
PC. IMHO LP-Bridge is a good choice for use with the K3, but all your
applications that want to talk with the K3 will talk instead to their own
LP-Bridge virtual ports - only LP-Bridge connects directly to the K3.
Hopefully that helps.
73,
Don W3FPR
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
