Jeff,
How many DE-9 connectors are there on your USB to serial adapter?
If only one (which is normal), then only one COM port should be defined.
That fact that you find 2 COM ports in device manager is cause for
question unless you have an adapter with 2 physical serial ports.
Don W3FPR
On 9/3/2016 10:03 AM, Jeff Griffin wrote:
I'm at FTDI 2.12.18.0,
I think this is the right level. There are no errors reported in any of the
comport properties menu's. When I plug the USB cable in, com ports 5 and 6
appear in the device manager list. All looks normal. My DXLab commander
setup is. K3, com 5(I also tried 6),38400{same as K3/0),8,N,2,Y,Y.
interrogate and enable are checked.
Anyone have any ideas, and can someone verify what level FTDI driver there
using that works. Thanks.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
