On Fri, Sep 9, 2016 at 5:55 PM, Grady Harper via Elecraft
<[email protected]> wrote:
> What are the
> Baud
> Word
> Parity
> Stop
> DTR
> RTS
> Settings for the K3s
Per the K3[S] Owner's Manual, 8 data bits (word length), no parity and
1 stop bit (but the stop bit setting is probably not really critical).
The baud rate should be set to match the K3's CONFIG:RS232 setting.
RTS and DTR should be set to "Off".
73,
~iain / N6ML
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
