On Thu, Sep 29, 2016 at 07:12:58PM -0400, Don Wilhelm wrote: > Phil, > > Don't be too quick to draw that conclusion. > Note that everything in the Low Pass Filter will appear to be connected to > ground at DC. If you want to make a valid DC resistance check, you have to > lift lead 4 of T4 and re-measure. >
Thanks Don. You was right, the 2 relays are fine (tested after I lifted T4 lead 4 as suggested). I checked also L16 and L17. I removed L17 because I wasn't sure it was properly stripped, and re-soldered it. I still have an issue on RX and TX on 80m. :( I need to go 'deeper'. 73, Phil. -- Philippe Givet F5IYJ / NK2F ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
