Hi Howard,
The Tenergy charger isn't an AC adapter. It is designed specifically to
charge the Tenergy pack used with the KX2. As a charger, its output
runs constant current initially, then it switches to a constant voltage
for the final charge push. This type of charger should NOT be used with
a KX2 because of the constant current output.
The best type of mains-powered for the KX2 to use is an AC adapter,
rated 3A or higher. I found that Triad makes a good set of them, and
they're available at retailers like Digikey and Mouser. Others on this
list have also tested various adapters for RFI, etc. (and DC power
quality) and you might check the archives for that info.
73!
matt W6NIA
KX2 Project Manager
On 10/6/2016 3:21 AM, Howard Sherer wrote:
With a change of din plug, can the Tenergy charger for the KX2 be used to
power the KX2 to full power. I would like to limit what devices I travel
with.
Howard AE3T
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
--
Matt Zilmer, W6NIA
www.elecraft.com
Office: 831-763-4211 x125
Mobile: 909-730-6552
[Shiraz]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
