On Tue,10/11/2016 1:57 AM, Alex Dokic via Elecraft wrote:
i see the important info on controlling the drive power with the power control on the k3 and not using ALC, also the TX delay time may have to be increased a bit. I am not sure on the connection from the k3 to acom.
I ran a 1010 for a while for CQP, only on SSB, so I can't comment on delay time. A simple RCA to RCA connector from the K3 to the 1000 is all that is needed to key the amp. You are correct that ALC should NOT be used between the K3 and the amp. This is true of virtually ALL rigs and amps. Using ALC to set power is a recipe for splatter and clicks.
73, Jim K9YC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
