Bill,
Try loading beta firmware 5.54 to that K3 and see if that behavior
continues.
That firmware improves the flash memory interface.
I can't say for sure if it will fix that K3, but is worth a try.
73,
Don W3FPR
On 10/20/2016 10:16 AM, Bill Coleman wrote:
Have our club's K3/100, serial # 67xx. When it is cold (FP=11C 52F ),
increasing the frequency using VFO A or VFO B causes a 1MHz jump DOWN in
frequency. When reducing frequency the failure is much less frequent and it
will also jump down 1 MHz. At times while tuning up in freq there are some
relay clicks - usually 2 - but no frequency jumps.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
