Update on K3-10 Rx sensitivity problem ..... found the culprit. The single standoff for the corner of the KANT3 board was loose between the standoff and the T connector by about a turn. Wiggling the board around caused the noise to come and go. Tightening the standoff cured the problem....Allen, W0OUU ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected]
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
