I wonder if anyone has interfaced a K3 with an MFJ-929, used as a remote tuner?
One of my antennas is a doublet fed with 450 ohm ladder line. The ideal place for a tuner is at the base of the ladderline and I intend to experiment with a variety of baluns to see which work best on which bands. I have a suitable housing for the auto ATU and balun(s), which may end up being switched remotely. The auto tuner can be set to an automatic mode whereby feeding a few watts of RF will generate a tune before adjusting power output of the K3 to the required level, but I wonder if this can be done in a more automated manner? Any help and guidance would be greatly appreciated. 73 Dave G3TJP ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com