Best is to eliminate the low (50, 100, 200 Hzbands). These contribute
nothing to intelligibility, and the MH3 has frequency response below 400
Hz, so you'd just be wasting energy because of this. With the low bands
at 0dB, I got reports of muddy audio.
I would also suggest a mid-band boost, say at 1.6 and 2.4 KHz, of 3 to 5
dB. This will assist intelligibilityin general.
I'm using these settings on a K3, KX3, and on a KX2 with different
microphones, and all of them produce excellent voice audio as reported
on-air.
73,
matt W6NIA
On 11/9/2016 1:28 PM, [email protected] wrote:
Any suggestions on what EQ settings for good SSB communication using the
Elecraft hand mic?
Any suggestions on what EQ settings for good SSB communications using any other
type of mike?
I am not seeking any fancy audio profile.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
--
Always store beer in a dark place. - R. Heinlein
Matt Zilmer, W6NIA
[Shiraz]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
