Fellow Elecrafters,
I am trying to do some Digital modes but using the
computer/Software
I am running a MacMini, with K3-S. Software is a Fldigi (3.23-13 latest as of
today).
Wiring - 1 USB cable from K3-S to MacMini.
I am using the RIGCat interface.
Configure->Sound Card -> Audio is set to USB Audio Codec (See below for device
confirmation)
K3-A is in DATA-A mode.
PTT-KEY is set to OFF-OFF (mentioned in the k3.xml right file)
QSY Works
Mode Works
RX Works - nice decoding on the Computer screen
But no TX Output. The K3-S red TX light is on - but nothing ….
As I have decoding on the Screen I am presuming that the USB cable is receiving
Audio from the K3 correctly.
The output from system_profiler SPAudioDataType yields sensible data….
specifically
Devices:
Built-in Output:
Default System Output Device: Yes
Manufacturer: Apple Inc.
Output Channels: 2
Current SampleRate: 48000
Transport: Built-in
USB Audio CODEC :
Default Output Device: Yes
Manufacturer: Burr-Brown from TI
Output Channels: 2
Current SampleRate: 48000
Transport: USB
USB Audio CODEC :
Default Input Device: Yes
Input Channels: 2
Manufacturer: Burr-Brown from TI
Current SampleRate: 48000
Transport: USB
So what am I missing ?
Answers on an electronic postcard please .
Regards
Tim - A45WG
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
