I am operating my K-3/100, KPA-500, and KAT500 successfully using a K3/0 at my residence with RemoteRig.
I’ve been asked to setup a station in a Public Library MakerSpace. The problem is the antenna and feed line. To keep the cost low, I am hoping to be able to use a PC Laptop runningTRX-Manager and a Remote Rig black box at the MakeSpace. My question is a simple one. What changes do I need to make to the Remote configuration and jumpers to be compatible with two types of control methods. At the moment, the TRX-Manager will not turn on the radio. I get two error messages: RTS and CTS are not available. J3 in the Remote Rig ties them together. The solution needs to be a single configuration at the radio side to support control by both a PC with Control SW at the MakerSpace and the K3/0 at home. Any help would be appreciated. 73, Dick, WN3R ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
