It doesn't solve you issue but the K3 is really good with FSK, ie clean.
RF? have you put ferrites on the cables with a number of turns? Does it happen with 5 watts, 50 watts 100 or 1000 watts?
On 11/13/2016 8:47 PM, Robie Elms wrote:
All, I have very limited experience with a K3 and I am helping a fellow club member get up and running on RTTY with his K3. Here is the setup: 1. We are using MMTTY in the AFSK mode 2. line in/out on the transceiver connected to the computer sound card mic and speaker input/output 3. PTT is via command the radio control port. The problem we are having is intermittent transmission of data. At times the set up works properly and then later when transmitting the K3 sends only a steady carrier. It appears that the computer is outputting audio tones to the K3 when this situation occurs. What are the potential causes of this problem. Any suggestions will be appreciated. Robie - AJ4F ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
