Phil,
There are RS-232 "Y" adapters that will accomplish what you want.
Make certain the other devices will not attempt to transmit - their
drivers on the RS-232 lines must be disabled and present a high impedance.
73,
Don W3FPR
On 11/16/2016 8:53 PM, Phil Holliday wrote:
Is there a schematic for this cable assembly? I am looking at the simplest way of
connecting other RS-232 driven peripheral equipment which are just ‘listening’
devices, in my case my SteppIR SDA100 controller and SPE 1K-FA linear and
minimizing cables now that I have a K3s & P3 connected by USB to my laptop with
Logger32 and N1MM+ as my logging applications. My immediate thought is to tap into
the CBLP3Y cable at the PC connection on the P3 and daisy chain the other devices.
73 Phil zl3pah
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
