If you're handy with a soldering iron, these FTDI USB to RS-232 "wire end" cables work well: http://www.ftdichip.com/Support/Documents/DataSheets/Cables/DS_USB_RS232_CABLES.pdf
The cable is a USB plug / converter at one end and "bare wires" at the other end. You will need to solder on a connector that fits your rig. Given that the K2 I/O connector is not standard, I would only connect pins 2, 3 and 5 on the mating connector. Mike, N0SO > On Nov 20, 2016, at 3:23 PM, w2bvh <[email protected]> wrote: > > I just retired my 2000 vintage shack computer and the new one doesn't have a > serial port. > > Is there a list somewhere of model numbers for USB to RS232 converters that > will play nice with both K2 and N1MM Logger under Win10? > > Now that I blew the big bucks on the computer I'd like to save a few on the > converter, without wasting any on one that won't work. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
