Hi to all: I posted the following on the MacloggerDX site and got a partial response, so thought I would try here also.
I have been using a Macbook Pro running the El Captan operating system and the MacloggerDX program for rig control and logging of a K3 for several years now and all is working FB. I’m in the process of adding two new rigs to the shack, a Yaesu FTdx 3000 and a K3S. I intend to use MacloggerDX and a single Macbook Pro for rig control and logging on all three rigs. Adding the FTdx 3000 in preferences on MacloggerDX seems to be pretty straight forward and foresee no problems there; however, adding the K3S in preferences, which will use the same utility as the K3 could be problematic. I should also mention that both the K3 and K3S have attached, identical P3 pan-adaptors, which also have a separate utility., How do I distinguish between the K3/P3 and K3S/P3 utilities in MacloggerDX? Or, do I use the same utilities for the both the K3/P3 and K3S/P3? Has anyone in the group traveled this road before and if you have, how did you handle the rigs and software? Any thoughts, help and/or guidance would be appreciated. Happy Thanksgiving to all! Best 73, Tom/W1QU ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
