HiNo, it is not 64 vs 32 bit.First thing to do is open up the device manager and looking at the comport entry. Then unplug the USB to serial device. One of the comport should disappear. Then plug it in.That will help determine if the port you are using is correct.Start with that. If you do not see the port disappear and then show up look for any exclamation marks.Start with that.73 Tom www.va2fsq.com
Sent from my Samsung Galaxy smartphone. -------- Original message --------From: Rick Braun <[email protected]> Date: 2016-12-18 6:43 PM (GMT-05:00) To: Elecraft <[email protected]> Subject: [Elecraft] K3 Utility with Windows 10 I downloaded the latest K3 utility onto my Surface Pro 4 with Windows 10. My K3 is serial 2869, with RS232 to USB adapter cable. I downloaded the driver indicated on the Elecraft site. Problem: I cannot, for the life of me, get the radio to connect to the computer. Could this be a 32 bit versus 64 bit compatibility issue? Any ideas or suggestions? By the way, the KX3 utility works fine on this computer. I’m baffled and ready to kick the cat. Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
