You can connect the sdrplay to the IF out of the K3 and use Win4k3suite  or 
hdsdr to view the spectrum.  The Sdrplay would need to be tuned to 8.215MHz in 
HDSDR or it is tuned automatically in Win4k3.the SDRPLAY will provide 2mhz 
bandwidth in its most useful configuration but you can go to 8mhz bandwidth.On 
the K3, you will see some interesting effects as the bandwidth is increased. 
Depending where you tune you can see signals all of a sudden disappear when you 
tune the radio when the bandpass filters take effect. None the less 1.8 mhz is 
good on the ham bands.73 Tom va2fsq.com 




Sent from my Samsung Galaxy smartphone.
-------- Original message --------From: Don Wilhelm <donw...@embarqmail.com> 
Date: 2016-12-23  2:02 AM  (GMT-05:00) To: Ignacy <n...@arrl.net>, 
elecraft@mailman.qth.net Subject: Re: [Elecraft] K3 and SDR-IQ and CW Skimmer 
Ignacy,

I know nothing about the display capabilities of SDR-IQ, so the only 
thing I can say is that the actual input frequency of SDR-IQ must be the 
same as the IF frequency of the K3 - 8215kHz.

73,
Don W3FPR

On 12/22/2016 3:52 PM, Ignacy wrote:
> I am trying to set up CW Skimmer with SDR-IQ and K3 so that SDR-IQ is
> connected to IF OUT and follows K3's frequency. Is this doable?
>
> If not, it there any way of configuring SDR-IQ to follow band changes with
> K3?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Reply via email to