Hi Mike, You can use the KY command to do that.
Use the K3 Utility to program separate macros with: KY VE3WDM; KY 599 CA; KY TU; Write them to the K3. Then use the KPod buttons to send. You can't send an increasing number for a report although if you have a P3 with SVGA you could. 73, Fred KE7X For all KE7X Elecraft books, see www.ke7x.com<http://www.ke7x.com> (Macro programming book coming) ________________________________ From: Elecraft <elecraft-boun...@mailman.qth.net> on behalf of Mike Weir <ve3...@hotmail.com> Sent: Friday, December 23, 2016 12:17 PM To: elecraft@mailman.qth.net Subject: [Elecraft] CW macro for K-pod Good afternoon all, here is what I want to do.............I have the K-pod and I wanted to set up some of the F buttons to send CW contest replies such as: My call TU Contest exchange and if possible an increasing serial exchange Just not sure how to set all this up? Thanks in advance Mike VE3WDM ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to fc...@montana.edu ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
