I have a kx3 --> kxpa100 -> kat500 hooked up. Both the kx3 and kxpa100 have internal tuners in bypass mode. With the kat500 in manual mode, I press the tune button on the kat500 to force a tune. When I press the XMIT button on the kx3, I often get an error on the kx3. It complains about an antenna or PA error. It doesn't do this if I place the KAT500 in bypass and use the kxpa100's tuner. So I'm wondering why I am getting these errors, as (even after getting the error) the tuner sees 1.2 or less SWR. It's more of a pain in the butt, because I have to do a few more button presses to clear the error and use the kx3.
Ideas ? If you're wondering why I have it this way, it's because my KPA500 is going back to elecraft for transformer hum (or it would be between the kxpa100 and the KAT500). -Kevin (KK4YEL) ----- The problem with the world is that the intelligent people are full of doubts, while the stupid ones are full of confidence. ----- The problem with the world is that the intelligent people are full of doubts, while the stupid ones are full of confidence. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
