My K3s/10 has no sub-receiver option. I use two speakers plugged in the rear jack that work perfectly. Firmware is up-to-date.
Now two issues: In USB Audio (digital) or Line Out (analog), when setting the Config:Lin Out: - in "=phones" I receive (pseudo-) stereo in my computer, but - in "nor xxx" only the left channel remains. Is this on purpose or did I miss a setting somewhere ? I'd like to obtain pseudo-stereo AFX also in "nor xxx" mode (i.e. AF setting has no influence) Beside this, the digital level is too weak (-30 dB peak with AGC=on) in USB audio. Would it be possible to rise the output level to AES/EBU Broadcast Audio Standard, i.e. -18 or -20 dB (depending on countries), or even more, as dynamic is lower for speech and therefore headroom can be reduced without clipping consequences. That would mean additional A/D gain : +10 dB, + 12 dB, and maybe +24 or +30 dB boost for weak signals? 73, Christian F1GWR K3s 1087x ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com