As Don noted, it should be quite simple. SWH40;
Toggles the text decode function. Use the VFOB knob to choose the speed range, threshold setting or OFF. I assume you want to control Text Decode remotely with a KPOD since it gains you nothing to assign that to one of the K3 front panel switches instead of pressing the K3 TXT DEC switch. You can assign that macro to any of the first 16 locations in the K3 so you can launch it from the KPOD. Use the KPOD rocker switch to enable control of the VFO B function at the KPOD to choose the speed range, threshold setting or OFF. 73, Ron AC7AC -----Original Message----- From: Elecraft [mailto:[email protected]] On Behalf Of Don Wilhelm Sent: Tuesday, January 3, 2017 6:03 PM To: Mike Weir; [email protected] Subject: Re: [Elecraft] Macro for text decode Mike, A macro that will operate the CWT button would be in order - nothing complicated at all. 73, Don W3FPR On 1/3/2017 7:26 PM, Mike Weir wrote: > I checked the archives looking for information regarding a macro for the K3 that will turn the text decode on and off. The most recent archive regarding this was from 2013 saying there was none. It's now 2017 and wondering if a macro has been written to preform this function? > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
