It decodes great, it did not send. I can send in data A. But offset is weird to me. I'll get it sorted. Lol Thanks Gerald
> On Jan 6, 2017, at 8:58 AM, Elecraft mailing list [via Elecraft] > <[email protected]> wrote: > > Gerald, > I assume you are using MRP40 to decode CW. Are you saying that it does not > decode at all? Or just some of the time? What are your settings on the Signal > Link and in the MRP40 software tab for the Soundcard? 73, Charles N2SO > Treasurer, Quarter Century Wireless Association, Inc. http://QCWA.org > > On Friday, January 6, 2017 9:37 AM, Don Wilhelm <[hidden email]> wrote: > > > Gerald, > > The Signalink is nothing more than a soundcard. > Have you plugged the Signalink output into the Line-in jack on the K3? > Make certain the plug is fully inserted. > Then go into DATA A mode and set the MIC SEL menu to LINE. > Adjust the MIC Gain (now LINE IN gain) to produce 4 bars solid with the > 5th bar flashing on the ALC meter - You can do that is TX TEST mode so > you do not transmit RF. > If the MIC GAIN is 'touchy' and at a very low level, go to the computer > and adjust the soundcard level lower. Normally a soundcard level of > about 75% is workable - too low and the S/N ratio is bad and too high > the soundcard can overload. > > 73, > Don W3FPR > > On 1/5/2017 9:10 PM, KC6CNN wrote: > > Has anyone used MRP40 with success with the K3 or with a K3 and signalink > > usb? > > I have tried and tried to get this to work. > > It will key the signalink and will key the radio, but no output or audio is > > transmitted. > > Sending the audio to my speakers works, but not to the radio. > > I have set jumper jp2 and jp3 to on which raises the output level of the > > signalink. > > I have adjusted the windows audio level and still nothing. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] > > If you reply to this email, your message will be added to the discussion > below: > http://elecraft.365791.n2.nabble.com/K3-with-Signalink-or-MRP40-tp7625485p7625506.html > To unsubscribe from K3 with Signalink or MRP40, click here. > NAML ----- KC6CNN - Gerald K1 # 0014 K3 # 6294 KX3 # 757 -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-with-Signalink-or-MRP40-tp7625485p7625518.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
