Richard, the K3 and K3S normally indicate received signal strength in receive mode, and show the SWR and Power Output in transmit. You can switch between that an Compression/ALC display by holding the METER switch. Is it possible you accidentally switched from the normal SWR/Power Output display to Compression/ALC?
73, Ron AC7AC -----Original Message----- From: Elecraft [mailto:[email protected]] On Behalf Of RichardG3ZIY Sent: Saturday, January 7, 2017 7:52 AM To: [email protected] Subject: [Elecraft] K3s meter It occurred to me that on transmit the S meter is somewhat redundant. A suggestion for the next firmware update is that the S meter change to power output when on transmit. I am aware that there is a setting to choose RF power or CMP/ALC, but I would like to be able to monitor CMP and ALC and RF power when in transmit mode, which I don't think is currently possible... unless I've missed some setting somewhere on the rig. 73, Richard, G3ZIY. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
