In the N1MM+ Configurer, under the Mode Control tab, under the right side "Mode sent to radio", beside RTTY you should select RTTY, in order to put the K3 into FSK D when clicking on an RTTY spot. For those who prefer to use AFSK A, the correct selection is AFSK. For PSK and other sound card modes using DATA A on the K3, you should select PSK in the boxes beside PSK.
Also, there is a check box in the Configurer under Mode Control called "Always use packet spot mode". This check box is mainly there for people who use N1MM+ outside of contests, or perhaps in some multi-mode contests. It should not be checked in single-mode contests, nor in multi-mode contests if you have not first set up the band plan limits in the Bandmap window to be appropriate for the particular contest. The appropriate sub-band limits change depending on the contest mode, and they are also different between domestic vs. DX contests. You can limit the problems this setting can cause to a certain extent by ensuring that the Mode Category in the Contest Setup dialog is set correctly (e.g. do not use a multi-mode category for a single-mode contest). 73, Rich VE3KI K5VIP wrote: > Whenever I clicked on a new spot in the N1MM+ bandspread window, the mode switched from FSK D to USB. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
