Use AFSK A mode for RTTY. DATR A can also be made to work, but
my experience with AFSK A is much better. FSK D does not use the
sound card for transmission.
Make sure your computer is producing enough output drive. On my
Mac I need to go to System Preferences -> Sound and raise the
output volume all the way.
Make sure your application is addressing the correct USB device.
(Don't ask how I know.)
Input from the radio should work but might be low in volume.
Some of us set Config: LIN OUT to about 40.
73 Bill AE6JV
On 1/10/17 at 2:16 PM, [email protected] (Dan) wrote:
Did RU this past weekend and could not get KIO3B to
XMIT-Receive is fine using MMTTY and N1MM. Ended up using my
Signal Link for XMIT.
Here is what I know.
NO line in or out connections on back of radio (per earlier email I saw)
Radio control, frequency, etc. work fine-just updated firmware
USB Codec shows as USB Codec 3 on computer. I can see AFSK
produced in transmit on MMTTY screen and the silly meter in the
sound control window. but no audio reaches radio
DATA Mode is set for AFSK A (like I have always used it for SIgnal Link)
Even if I manually turn XMIT on no audio IN. (I am using VOX and not PTT) Do I
need to enable PTT?
I have tried switching MIKE to LINE IN to no avail.
-----------------------------------------------------------------------
Bill Frantz | Security is like Government | Periwinkle
(408)356-8506 | services. The market doesn't | 16345
Englewood Ave
www.pwpconsult.com | want to pay for them. | Los Gatos,
CA 95032
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
