Unless I'm mistaken, doesn't the K3S connect directly via USB though? If the problem is happening because of common mode on the USB cable, there is no physical RTS line involved like there would be in an old-style COM/RS232 device- there is only serial data going across a USB cable to a logical COM device inside the K3S. It most likely wouldn't change anything in this case.
Nick On 12 January 2017 at 10:08, Joe Subich, W4TV <li...@subich.com> wrote: > > On 1/12/2017 11:05 AM, John Stengrevics wrote: > > What’s the solution, ferrites on the USB cable? > > Stop using CAT Commands for PTT! Instead set CONFIG:PTT-Key to > RTS-OFF and use RTS. WSJT-X supports PTT Method = RTS by setting > the PTT Port the same as the CAT Port. > > 73, > > ... Joe, W4TV > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@n6ol.us > -- *N6OL* Saying something doesn't make it true. Belief in something doesn't make it real. And if you have to lie to support a position, that position is not worth supporting. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
