Thanks everyone for all the offers for the bias box, I now have one OTW.
Jim, I was going to build one, it would certainly be simple enough. Try to
find a suitable battery box that will have room for the mic pass through
cables. I thank you for your always useful information.
So I figured plenty of people would still have them laying around on a K3
group. I lost mine I never had a use for during a move, or it's sitting in
my summer home in NJ.
73 Jeff kb2m
-----Original Message-----
From: Jim Brown
Sent: Sunday, January 15, 2017 1:47 AM
To: [email protected]
Subject: Re: [Elecraft] bias battery box fromYamaha CM500
On Sat,1/14/2017 6:57 PM, Jeff wrote:
Does anyone have a spare, or unused bias battery box that came with your
Yamaha CM500 headset? I desperately need one to use my headset with a
radio other them my K3.
Sort of near the end of this set of slides are simple instructions for
using ANY electret mic with any radio. You WILL need a soldering iron
and a few connectors. And you will need to open the manual for that
radio to find pin-out of the mic connector. Start with slide #168 and
continue from there.
http://k9yc.com/GroundingAndAudio.pdf
73, Jim K9YC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
