Can anyone tell me the command to remotely set the Line Input gain. I
know that the rig first has to be placed in the Line Input mode, which I
can do remotely. But, the Line In Gain is distinctly separate from the
Mic Gain. There is a remote command that sets the Mic Gain correctly,
but there is no command I can find to set the Line In gain when in Line
mode from a remote site.
To be perfectly clear, the rig works correctly using the real front
panel controls. If you select Line In, then the Mic Gain becomes the
Line In Gain. When you change to a Mic input, changing the front panel
Mic Gain has no effect on the line input level, i.e., the radio
remembers the separate Line In gain setting. This is certainly easy to
verify. Further, using the Elecraft Utility in Debug Mode, different
codes are sent by the front panel Mic /Speed knob depending on whether
you are in Mic or Line input mode.
If there is a command, it is apparently undocumented unless one of you
out there happens to know it.
Thanks.
Gary
K3OS
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
