Paul Smith writes:
I called the 4SQRP net tonight on 3564. I had my KX2 for a transmitter and my old tribander for receive. Here is what things are set at.
<snip>
The BW is at 2.80
I'm confused. Are you working CW or SSB? 3564 is CW and your filter should be like .25, .30 or whatever you set it at in CW mode. A filter BW of 2.80 is an SSB filter BW. Do you have your KX2 in the wrong mode or some split mode? (I.e., TX on one VFO, RX on another?)
What mode are you trying to work?
I am ocnfused what to do and or to look for. I could hear checkins on my Tribander and not a peep heard on the KX2
My KX2 is more than sufficiently sensitive and yours should be too with 100' of wire in the air. Most signals are quite clear and distinct with the audio set 8-12, and higher than that only for very weak signals.
So check that you are in the right mode, ensure RIT and XIT are turned off (for no offsets), and RX and TX both on VFO-A, then tune around and you should hear signals. If not, let us know. I've only used the KX2 on CW, but I've never seen the PREamp change to something else on its own without hitting the PRE button. It should be in PRE mode for most work.
GL es 73, Paul NA5N ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
