I am programming two macros for setting 100W and 65w (for amplifier) on my K3S for storing on PF2. I setted on macro 5 (amp on): MN019;MP001;MN255;PC065;MN110;SWT27;SWH47;SWT14;I setted on macro 6 (100w): MN019;MP001;MN255;PC100;MN110;SWT29;SWH47;SWT14; Both work from K3 utility and from K-Pod, then I store them on PF2, in this way: On the K3S I go to CONFIG:MACRO and press "5" HOLD the PF1 key until "PF2 SET" appears Tap the "Menu" keyThen go to CONFIG:MACRO and press "6" HOLD the PF2 key until "PF2 SET" appears Tap the "Menu" key But every time I push (hold way) PF2 it set everytime 100W, dont change 65-100 watts every pushing. It seem that only last storing on PF2 has been saved. Sure something is wrong , even if same kind of setting on PF1 dor split/unsplit work. Can somebody help me? I have bought Fred Cady beautiful book on macros programming, and I will study it, but if somebody can give me a fast solution I will be very happy :) Ian IK4EWX
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
