I have been trying to make FSK work with my K3 since last September on and off (excuse the pun). I have tried 4 different interfaces, I have traced through all the cables many times, tried different software, tried different COM ports, I have torn my hair out, etc.
I have a splitter on the output from the K3's ACC socket to an Export 1.3k, a band decoder and an XV144 transverter, as well as the FSK keying lead. As a last resort I tried unplugging the various peripherals one by one from the splitter box. And hey presto, when I unplugged the transverter the problem is finally resolved and I can hear diddles emitting from the radio! The transverter pulls pin 1 down to earth! This is a serious issue! I haven't gone any further yet, to investigate why pin 1 is even connected to the transverter. Now what if I wanted to operate RTTY on 2m??! I hope this helps anyone else who has this issue. 73 Stewart GM4AFF ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
