Recently I had to replace the router at my remote site. The replacement router is the same model as its predecessor (Cisco EA4500). I had good, but possibly imperfect, records of the port forwarding setup which I reproduced on the replacement router. Now, pressing POWER on the Control K3 turns the Remote K3 ON and operates correctly, but when I turn off the Control K3, the Remote K3 stays on. If I then tap the POWER button on the Remote K3, its screen goes solid amber with no LCD segments lit, but it does not fully power down. It also becomes catatonic, its own POWER button useless, but it's still responsive to power on from the Control K3. I have Restarted both RemoteRig boxes to no avail. I have confirmed that my DDNS real IP address is correct.
In case it's material, here are the port forwards I have in place: RRC UPD Cmd 10000 RRC UDP Audio 11000 RRC Web 5058 RRC Telnet 5059 RRC SIP 5088 All port forwards are set the same for both internal and external use, both TCP and UDP protocols, LAN address of the RRC. Is something missing? Any suggestions? Thanks, /Rick N6XI -- Rick Tavan Truckee, CA ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
