Ted,
On the K-Pod, with the rocker switch in the VFO B position, it will do
whatever the VFO B knob on the K3 will do.
If you have VFO B Alternate Display up, it will rotate between the
Alternate Display items, just like the VFO B knob would do.
You could create a macro that would switch the display from the
alternate VFO B display to the frequency display and use a K-Pod F
button to activate that macro.
73,
Don W3FPR
On 2/5/2017 7:10 PM, Dauer, Edward wrote:
Noticed something today that surprised me at first. When the K3’s VFO B area
display is set to the clock and etc. function, and the K-Pod rocker switch is
set to VFO B, the K-Pod knob rotates through the display items and does not
control the VFO. As I thought about it, that does make sense – the VFO B knob
itself controls one or the other depending on how the display is set. I
assume, then, that the K-Pod’s encoder output is superimposed on the K3’s
encoder B rather than having its own entryway into the VFO. It’s not a big
problem, but it would be nice if the time and etc. display could stay visible
yet have the K-Pod control VFO B’s frequency. When using a P3 with the K3 in
split it’s not always necessary to have the VFO B frequency shown in the
display area. Is there some way to have one’s clock and B it too?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
