Nick,
You should be able to adjust the (transmit) power level well below 3
watts right now, but if you do an ATU TUNE, the power used for that
should be 3 watts.
ATU TUNE and TUNE are two different things - check the manual info for
TUN PWR in the listing of menu items. It clearly states that the ATU
TUNE uses either 2 or 3 watts.
TUNE should follow the power setting if TUN PWR is set to NOR.
73,
Don W3FPR
On 2/9/2017 12:58 PM, Nicklas Johnson wrote:
If that's the case, it might be nice in a future firmware to make 3W
the lowest value for tun-pwr. As it is today, it makes it appear as
though you could select values as low as 100mW, even though you
actually can't.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
