Specifically the error means that something plugged into the USB ports of the computer is exceeding the amount of power it should be drawing. There could be several reasons, including a short in the USB cable or a device that doesn't follow the protocol for getting more power from the port.
Unplug everything and work your way back until you find the culprit. Good luck, - Brendon KK6AYI On Thu, Feb 9, 2017 at 7:01 PM, PHILIP GRAITCER <[email protected]> wrote: > I’ve just had the KIO3B USB interface installed on my K3. When I plug it > into my Mac Mini I get the following message: “USB DEVICES DISABLED - > Unplug device using too much power to re-enable USB devices”. What does > this mean? I am unable to connect my logging program, MacLoggerDX. > > THanks, > Phil, W3HZZ > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
