Hi Don,
I removed the 200Hz filter this morning, and as you said, the offset
was on the paper tag. I set up the -0.87 offset via the K3 utility, and now
all is well.
Thank you for your help, much appreciated.
73, Stuart GD0OUD.
-----Original Message-----
From: Don Wilhelm [mailto:[email protected]]
Sent: 09 February 2017 23:12
To: Stuart; [email protected]
Subject: Re: [Elecraft] KFL3C-200 Filter
Stuart,
Look on the filter itself. The offset should be marked on the paper tag
affixed to the filter.
I don't know about the new 6 pole filter, but that is true for the 5
pole filters, and I assume it is the same for that one.
In other words, the offset is not on separate paperwork.
73,
Don W3FPR
On 2/9/2017 4:52 PM, Stuart wrote:
> I have fitted the KFL3C-200 Filter to my K3. There was no paperwork with
the
> filter, to give a frequency offset, if any.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
