If the kxpa100 power slide switch is OFF, the amp depends on periodic polls from the kx3 to keep it on.
Dick, K6KR > On Feb 12, 2017, at 14:39, Don Wilhelm <[email protected]> wrote: > > Jack, > > It would seem that you have tackled the most obvious stuff. > I don't know whether you have a bad display or not, so I suggest you contact > K3support to see if they might have seen a problem like that. > > I have heard about prior problems with PA MODE turning off, but I don't > recall what is to be done about it. A fault in the KXPA100 can cause it, and > the support folks may want a fault report from KXPA100 Utility. > > 73, > Don W3FPR > >> On 2/12/2017 1:51 PM, Jack Spitznagel wrote: >> All, (particularly Don or one of the kind folks at Elecraft support) >> >> There are two seemingly interrelated problems in this message that may >> indeed be independent. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
