Clifton Web used to make a precision IF buffer with a SMA connector Out of the back of the k2. I have one in my K2. That circuit schematic is on the web, there you
Leroy AB7CE -----Original Message----- From: Elecraft [mailto:[email protected]] On Behalf Of Don Wilhelm Sent: Sunday, February 12, 2017 8:49 PM To: Ray Sills <[email protected]>; Elecraft Reflector <[email protected]> Subject: Re: [Elecraft] The market for Full Kit Radios? Ray, If you provide the K2 with an IF output, the P3 will work just fine as a panadapter. You need a buffer amplifier for the IF output. LP-Pan will also work, but you need software running on the computer - NaP3 or Win4K3 should work nicely. 73, Don W3FPR On 2/12/2017 6:28 PM, Ray Sills wrote: > Not to rain on anyone’s parade, but I’d wager you would need at least several > hundred, maybe thousands more serious buyers, for it to be financially viable > for Elecraft (or a 3rd party) to make a panadapter for the K2. > > BTW, is it not the case that the K2 is a traditional superhet? That means > you’d not have a “free ride” that you would have with an SDR… I/Q signals > already available. Maybe the P3 would be adaptable for the K2.. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
