The Cliffton Webb unit was specifically made for K2 exact signal/clean easy
physical fit internally,
and a external IF pass band filter for a clean signal no matter what kind
of signals
are present in your shack.
Not a area of your receiver where you want to be hacking about. Just saying.
73 Leroy AB7CE
-----Original Message-----
From: Heinz Bärtschi
Sent: Monday, February 13, 2017 11:22 AM
To: Ken G Kopp
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K2 IF output
That would be an option:
IF Adapter full kit (SMD components):
http://www.qrp-shop.biz/epages/qrp-shop.sf/de_DE/?ObjectPath=/Shops/qrp-shop/Products/Vk2zfadapter
IF Adapter kit (all SMD components soldered):
http://www.qrp-shop.biz/epages/qrp-shop.sf/de_DE/?ObjectPath=/Shops/qrp-shop/Products/Vk2zfadapterBestückt
73, Heinz HB9BCB
Am 13.02.2017 um 18:43 schrieb Ken G Kopp <kengk...@gmail.com>:
Who makes a Clifton Labs Z1000B replacement for the K2?
On Feb 13, 2017 07:46, "Don Wilhelm" <donw...@embarqmail.com> wrote:
Ken,
Sorry, but I do not.
There is a ham in England who produces a buffer amplifier that can be
used, but I cannot recall who.
If you ask on the reflector for a Clifton Labs Z10000B replacement, you
may get some hits.
73,
Don W3FPR
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to lmar...@mt.net
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
