Hi Jim,
I've never had a problem with external computer keying through the K3 serial port, it works fine in K3 CW PTT mode. My recommendation is to: - remove the unwanted VOX delay applied to the end of the PTT in VOX mode - Eliminate the unwanted QSK behavior of the internal keyer when the K3 is in CW PTT mode. Ideally the improved K3 behavior should be just the very well designed K1EL WinKeyer that so many of us are using because the K3 internal keyer is so bad. 73 Frank W3LPL ----- Original Message ----- From: "Jim Brown" <[email protected]> To: [email protected] Sent: Wednesday, February 15, 2017 6:32:26 PM Subject: Re: [Elecraft] winkeyer I don't think the suggestion is to emulate a WinKeyer to contesting software, but rather for the internal keyer to have the same logic as WinKeyer when you send with a paddle and for the amp keying line to behave like the WinKeyer when sending either with the paddle, or from the computer via the straight key jack or the DTR line. Right, Frank? 73, Jim K9YC On Wed,2/15/2017 10:07 AM, iain macdonnell - N6ML wrote: > Most (/all) software will expect to talk to the WinKeyer on a separate > serial port from the rig, so for that to use useful, you'd have to > come up with some way to combine the traffic from/to two virtual > serial ports into one real one. It's probably doable in software, but > maybe non-trivial.... ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]

