Hi! I got the below advice which worked for me: For WSJT-X and the K3S use: 
Mode = DATA Data sub-mode = DATA A MENU:MIC SEL = Line IN Make sure nothing is 
plugged into the "LINE IN" jack. Set the PWR slider in WSJT-X to the top, click 
Tune and adjust the K3 MIC GAIN for *four bars* of ALC. Adjust the K3 PWR 
control for the desired power output. Best regards, Bret C. Bret Jessee ------ 
Original Message ------ From: everettsharp [via Elecraft] To: Charles Bret 
Jessee Sent: February 19, 2017 at 7:12 PM Subject: Re: WSJT-X and K3S Tx 

        I am having the same problem, with not being able to send audio to my 
K3S from WSJT-X. The transmitter is being keyed, but nothing is showing up on 
the ALC. I normally use WSJT-X with HRD, but have tried to bypass HRD to see if 
the will work by going direct, which did not work either. It has been working 
fine until this morning when it quit working. I am able to send the audio to 
the K3S using DM780, running PSK31. 
I am running Windows 10 on a HP I5, 64 bit. The computer has two sound cards, 
one for digital and the other for YouTube, music and such. For digital I am 
setup in both HRD and WSJT-X, with the sound card settings "Speaker USB 
Audio CODEC". A few days ago I was able to have my default sound card set 
to "Speaker Envy24 Family Controller", but something happen and now 
the only way I was able to get the sound to the K3S was to change the default 
sound card to "Speaker USB Audio CODEC".
However, I was able to work PSK on the HRD DM780 with the default sound card 
set to "Speaker Envy24 Family Controller", but not with WSJT-X.
I did update my Firmware on my K3S this morning to 5.56, if I remember 
correctly the WSJT-X was working correctly after words.
Uninstalled the WSJT-X and reinstalled with no change in the problem. I have 
been operating WSJT-X now for about 2+ years, so I am not a newbie. However, I 
sure am pulling my hair now........
Everett N4CY


        
        
        
        
        
        
        
                If you reply to this email, your message will be added to the 
discussion below: 
                
http://elecraft.365791.n2.nabble.com/WSJT-X-and-K3S-Tx-tp7622439p7627156.html 
        
        
                
                To unsubscribe from WSJT-X and K3S Tx, click here . 
                NAML 
        



--
View this message in context: 
http://elecraft.365791.n2.nabble.com/WSJT-X-and-K3S-Tx-tp7622439p7627161.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Reply via email to