At my home station I run my transmitters on a "boosted" 14+ V bus using a TG Electronics Boost Regulator - and "the knobs" at about "3 o'clock". The station battery can go as low as 11.5 V but the 14V bus stays there.
On 2/20/2017 3:56 PM, Ron D'Eau Claire wrote: > For the rigs running off of 12 (13.8) Vdc, how about simply not running the > rig "all knobs full right"? > > Reducing the power by 25% will improve IMD performance at lower voltages, > yet that power difference is virtually impossible to detect on the H.F. > bands. 73 de K2ASP - Phil Kane Elecraft K2/100 s/n 5402 >From a Clearing in the Silicon Forest Beaverton (Washington County) Oregon ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
