When the K3/0 is connected to the K3, the rP or Fp menu sets the condition of the K3, not the K3/0. When the K3/0 is not connected, the setting changes the K3/0. But I have had much better luck with connecting directly to the mic input om the RRC control, so try that if you can.
73 John N5CQ -----Original Message----- From: Elecraft [mailto:[email protected]] On Behalf Of LA7NO Sent: Sunday, February 26, 2017 9:38 AM To: [email protected] Subject: Re: [Elecraft] K3 Remoterig K3/0 MIC connection I just found tha there is a comment on the K3 mic setting on the top of p.16 in the K3 Remote manual. I have now changed my setting for K3 to "rPL". Not sure if it should have been "rPH". Does the setting of the K3/0 have any influence when in remote mode? I find it a bit confusing that there apparently are two menu settings for the K3/0: one while disconnected from Remoterig and another while connected through to K3. P-T -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-Remoterig-K3-0-MIC-connection-tp7627 375p7627379.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
