Have you tried programming the identical function into both the TAP and HOLD macros for each button? It's very easy to hold down a K-POD button a bit too long, which runs a different macro. If nothing is programmed for the HOLD function, you'll see "MACRO 1" or similar blink in the VFO B display.
If that's not it, what are the command strings programmed into M1-M4? Do they contain any leading or trailing blanks? 73, Bob, N6TV On Mon, Feb 27, 2017 at 10:19 AM, Wes Stewart <[email protected]> wrote: > With a nod to Cool Hand Luke > > I have mentioned this before in another thread but have heard no response. > > I, and I know others, have experienced the annoyance of tapping a key on > the K-Pod and after noticeable latency, seeing a message appear in the VFO > B space that acknowledges the tap, yet the requested action fails to > occur. Specifically in my case, I'm trying to send CW messages stored in > M1-M4. > > This use was the main reason I asked for one of these for a Christmas > gift, so I could use my left hand and save both the buttons on the radio > and/or my rotator cuff on my sending hand. > > Can we get a fix for this? > > Wes N7WS > > ps. Another function button is supposed to turn VOX on and off. This fails > too often as well. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
