I am unable to select 10 Mhz for an IF for transverter use only selections are
7,14,21, or 28
10 Mhz is enabled (can you disable a band on the K2) and works as a regular
band.
From: Don Wilhelm <[email protected]>
To: Harry Yingst <[email protected]>; Elecraft Reflector
<[email protected]>
Sent: Tuesday, February 28, 2017 8:37 PM
Subject: Re: [Elecraft] Transverters on the K2, IF Frequencies, No 10 Mhz
Option?
Harry,
Do you have 10MHz mapped out for the band selection process?
73,
Don W3FPR
On 2/28/2017 6:16 PM, Harry Yingst via Elecraft wrote:
>
> As per the K60XV Assembly and Operating Instructions Page 18 "The IF field
> can be set to 7, 10, 14, 21, or 28 MHz."
> When I go to set the IF the options are only 7, 14, 21, or 28 MHz. The 10
> MHz option is not available.
>
> I'm running the latest firmware v1.09 on the K2 and v1.02 on the K60XV (or
> so I would believe it to be as this is a new K2).
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
